Fluke Networks LIQ-KIT-FTK1475

Include:

  • LinkIQ Cable+Network tester includes LinkIQ with remote IDs #1-7
  • RJ45-RJ45 patch cord
  • AC charger
  • RJ45/11 universal coupler
  • IntelliTone Pro 200 probe and duffle bag carrying case
  • SimpliFiber Pro optical power meter
  • 850/1300 multimode source
  • 1310/1550 single-mode source
  • VisiFault Visual Fault Locator with 2.5mm universal adapter
  • Two AAA batteries
  • Two (2) FindFiber Remote ID sources
  • Magnetic strap attachments and carrying case
  • SC, ST, and LC power meter adapters
  • FiberInspector Micro with Probe
  • Display
  • 4 UPC tips (LC bulkhead, SC bulkhead, 1.25mm end face adapters, and 2.50mm end face adapters)
  • Rechargeable batteries and universal power adapter; NFC-KIT-BOX fiber optic cleaning kit.
SKU:81440

MME Shopping Event

Hurry and get discounts on Most of MME Products up to 20%

Call for Price

19People watching this product now!

Fluke Networks LIQ-KIT-FTK1475

The Fluke Networks LIQ-KIT-FTK1475 is a comprehensive fiber optic testing kit designed for network technicians and engineers who require reliable and accurate tools to certify, troubleshoot, and inspect fiber networks. This kit is part of Fluke Networks’ extensive range of solutions that support the maintenance of telecommunications and data communications networks.

Included in the LIQ-KIT-FTK1475 is the FiberInspector™ Pro, a fiber inspection and cleaning tool that helps ensure that connections are free from contaminants that could cause connection failures or degrade network performance. This is crucial as even small particles can obstruct the fiber core and significantly impact the quality of the signal.

Fluke Networks LIQ-KIT-FTK1475 Key Features

  • Measure network cabling performance up to 10 Gig via frequency-based measurements
  • Troubleshoot active networks by providing connected switch information (Switch Name, IP Address, MAC Address, Port Number, and VLAN info)
  • Test connectivity to TCP/IP network through IP configuration and ping
  • Verify Gateway and DNS server responsiveness and availability

Fluke Networks LIQ-KIT-FTK1475 Specifications

General Specifications

FeatureDescription
Languages supported in UIEnglish, German, French, Japanese, Spanish, Thai, Traditional Chinese, Simplified Chinese, Korean, Russian, Italian, Portuguese
Weight1 lbs 6 oz (624g)
BatteryType: Lithium-ion, 3.6 V, 6400 mAh<br>Life: 8 hours typical<br>Charge time: 4.5 hours<br>Charging temperature range: 0 °C to +40 °C
Power AdapterInput: 100 to 240 VAC ±10%, 50/60Hz<br>Output: 15 VDC, 2 A maximum<br>Class II
Host InterfaceUSB type C
Display800 x 480 color capacitive multi-touch
Dimensions8.5 in x 4.5 in
Operating Temperature0°C to 45°C
Storage Temperature-10°C to +60°C
Operating Relative Humidity0 % to 90 %, 0°C to 35°C<br>0 % to 70 %, 35°C to 45°C
Operating Altitude4,000 m<br>3,200 m with ac adapter
VibrationRandom, 2 g, 5 Hz-500 Hz
Drop1 m drop, 6 sides

Active Network Diagnostics

FeatureDescription
Diagnostic ProtocolsLink Layer Discovery Protocol (LLDP), Cisco Discovery Protocol (CDP), Fast Link Pulses (FLP), ICMP, DHCP
IP Address SetupLinkIQ address, DNS Server, Gateway for IPv4 or v6 either manually or via DHCP.
IP Ping Test ResultsFour response time results for target, DNS Server(s), Gateway, plus average and number lost
Nearest Device DiagnosticsSwitch Name / IP + MAC Address<br>Port Number<br>VLAN Name<br>Advertised Data Rates<br>Advertised Duplex
Power Over Ethernet CompatibilityEthernet Alliance Certified to IEEE 802.3af/at/bt<br>Hardware negotiation with signature resistance<br>Software negotiation with LLDP/CDP
Power Over Ethernet DiagnosticsAdvertised Power Class (0-8)<br>Advertised Available Power<br>Powered Pairs<br>Diagnostics for both Single and Dual signatures
Power Over Ethernet MeasurementsLoaded Voltage (V)<br>Loaded Power (W)
Port BlinkBlink the light of the connected port

Cable Test Specifications

FeatureDescription
Test PortShielded 8-pin modular jack accepts 8-pin modular (RJ45) plugs.
Commissioning Autotests10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX, 10BASE-T, Wire map Only<br>Test Speed: 6 seconds for lengths < 70 m
Cable TypesBalanced twisted-pair cabling<br>Unshielded twisted-pair<br>Screened twisted-pair<br>2-pair and/or 4-pair
Wire Map-Only TestsDocument wire map<br>Length of each pair<br>Diagnose split pairs<br>User selectable T568A or T568B<br>User selectable crossover settings (Straight through, Half-crossover, Full-crossover)<br>Test speed: 1 second for lengths < 120 m
Length (Maximum)305 m (1000 ft)
Nominal Velocity of Propagation (NVP)User settable
Tone GeneratorGenerates digital tones compatible with Fluke Networks IntelliTone probe.<br>Generates analogy tones compatible with general analog probes.
Remote ID LocatorsUse remote ID terminations to identify up to 7 unique ports or office outlets
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Fluke Networks LIQ-KIT-FTK1475”

Brand

Fluke

Fluke Corporation

Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.

Datasheet

Mme-Pdfs-Image

Specifications