Fluke 190-102-III-S ScopeMeter with FlukeView-2 software

Include:

  • ScopeMeter
  • Power Adapter
  • Testlead Set
  • 2 x Probe
  • Handstrap
  • Hangstrap
  • USB-Cable
  • WiFi Dongle
  • Power Cord Set
  • Carrying Case
  • Li-ion Battery Pack
  • FlukeView Activation Instructions
  • User Manual
  • ScopeMeter Software Package (full version)
SKU:79033

MME Shopping Event

Hurry and get discounts on Most of MME Products up to 20%

Call for Price

17People watching this product now!

Fluke ScopeMeter® 190-102/S

Fluke 190-102-III-S Accurate and versatile, this handheld oscilloscope offers fast sampling rates of up to 5 GS/s, 200 ps resolution, and deep memory of 10,000 samples per channel. Make measurements involving timing or amplitude on a three-phase or three-axis control system, or compare and contrast multiple test points in the circuit being tested.

Fluke ScopeMeter 190 102 III S Features

  • Up to four independent floating isolated inputs, up to 1000 V
  • Up to 5 GS/s real time sampling (depending on model and channels used)
  • Deep memory: 10,000 points per trace waveform capture (scope mode)
  • CAT III 1000 V/CAT IV 600 V safety rated instrument for industrial environments
  • Up to seven hours of battery operation using BP291
  • Large, bright color display is easy to view in nearly any environment
  • Easy to store and view historical data and transfer to a PC via USB or Wifi
  • Convenient battery access door for quick battery swaps in the field
  • IP51 rating, dust and drip-proof
  • Connect-and-View triggering for intelligent, automatic triggering on fast, slow and even complex signals
  • Frequency spectrum using FFT-analysis
  • Automatic capture and REPLAY of 100 screens
  • ScopeRecord mode gives 30,000 points per input channel for low frequency signal analysis
  • TrendPlot Paperless Recorder mode with deep memory for longterm automatic measurements
  • 5000 count DMM included in the 2-channel models

Fluke 190 102 III S Specifications:

Vertical Deflection
Number of Channels4
Bandwidth100 Mhz
Rise Time3.5 ns
Channel ArchitectureAll inputs fully insulated from each other and from ground
Inputs may be activated in any combination
Input CouplingAC or DC, with ground level indicator
Input SensitivityWith 10:1 probe, 20 mV to 1000 V/div
With 100:1 probe, 200 mV to 10 kV/div
Direct (1:1), 2 mV to 100 V/div
Bandwidth Limiter20 MHz and 10 kHz
PolarityNormal, inverted, variable
Vertical Resolution8 bit
Accuracy at 4 s to 10 μs/div5 mV/div to 100 V/div, ±(1.5% + 6 counts)
2 mV/div, ±(1.5 % + 10 counts)
Input impedance1 MΩ (±1 %) // 15 pF (±2.25 pF)
Input Voltage Range
Rated Maximum Floating VoltageCAT III 1000 V / CAT IV 600 V (maximum voltage between any contact and earth-ground voltage level)
Probe Input Voltage VPS410-IICAT III 1000 V / CAT IV 600 V (maximum voltage between standard 10:1 probe tip and reference lead)
Probe Input Voltage VPS421CAT III 1000V / CAT IV 600V (maximum voltage between probe tip or reference lead to GND, 2000V max between probe tip and reference lead)
Maximum BNC Input VoltageCAT IV 300 V (maximum voltage on BNC input directly)
Maximum Voltage On Meter InputCAT III 1000 V / CAT IV 600 V (safety designed banana input connectors)
Memory Save and Recall
Memory Locations (Internal)30 waveform memories plus 10 recording memories plus 9 screen copy memories
30 Waveform MemoriesEach memory can contain up to 2 or 4 waveforms plus corresponding setups
10 Recording MemoriesEach may contain: a 100 Screen Replay sequence, or a ScopeRecord Roll-mode recording (2 or 4 traces), or a TrendPlot recording of up to 4 measurements
External Data StorageOn PC, using FlukeView™-2 Software, or direct storage on external flash memory drive (maximum 32 GB) through USB host port
ScreencopiesOn PC, using FlukeView™-2 Software, or internally (in instrument) which can be copied on to external flash memory drive as .BMP-file, through USB host port
VolatilitySaving is done in non-volatile Flash-ROM and all data is secured, independent of battery or power status
Real-Time ClockProvides date and time stamp information for ScopeRecord, for 100 Screen Replay sequences and for TrendPlot recordings
Case
DesignRugged, shock-proof with integrated protective holster. Handstrap and hangstrap included as standard
Kensington lock supported to lock down instrument when left unattended
Drip and Dust ProofIP 51 according to IEC60529
Shock and VibrationShock 30 g, vibration (sinusoidal) 3 g / 0.03 g2/Hz (Random), according to MIL-PRF-28800F Class 2
Display Size5.3 x 3.5″ (133 x 90 mm) LCD
Resolution1120 pixels x 765 pixels
BrightnessUser-adjustable, up to 300 cd/m2
General Specifications
TemperatureOperating: battery discharging: 32 to 104°F (0 to 40°C); battery charging: 0 to 40°C (32 to 104°F)
Storage: -4 to 140°F (-20 to 60°C)
Humidity32 to 50°F (0 to 10°C): noncondensing
50 to 86°F (10 to 30°C): 95% (±5%)
86 to 104°F (30 to 40°C): 75% (±5%)
104 to 122°F (40 to 50°C): 45% (±5%)
Maximum Operating AltitudeCAT IV 600 V, CAT III 1000 V: up to 6600’ (2000 m) CAT IV 300 V, CAT III 600 V, CAT II 1000 V: up to 13000’ (4000 m)
Maximum Storage Altitude40,000’ (12 km)
InterfacesTwo USB-ports provided
Ports are fully insulated from instrument’s floating measurement circuitry
USB-host port directly connects to external flash memory drive (up to 32 GB) for storage of waveform data, measurement results, instrument settings and screen copies
Alternatively, this USB-A port may be used to connect a WiFi Adapter for wireless PC connectivity
A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under PC-control using FlukeView-2.
Probe Calibration OutputDedicated probe-cal output with reference contact provided, fully insulated from any measurement input channel
Generator Output: 1.225 Vpp / 500 Hz square wave
Line PowerUniversal mains adapter/battery charger BC190/830 included, with detachable 2-wire power cords 100 VAC to 240 VAC, ±10%, 50 to 60 Hz
BatteryPower: re-chargeable Li-Ion battery; battery swappable through easily accessible battery door at the rear of the instrument
Type: BP290: 10.8V, 2500 mAh
Charge indicator: battery has built-in status indicator for use with external charger, next to battery status indicator on instrument screen
Operating time (with backlight low): up to 3½ using BP290
Charging time: 2½ hours using BP290; 5 hours using BP291
Power saving functions: Auto ‘power down’ with adjustable power down time; automatic ‘display off’ with adjustable power down time; on-screen battery power indicator
Dimensions10.5 x 7.6 x 2.8″ (265 x 192 x 70 mm)
Weight4.6 lbs (2.1 kg)
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Fluke 190-102-III-S ScopeMeter with FlukeView-2 software”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Brand

Fluke

Fluke Corporation Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, metrologists, medical-device manufacturers, and computer network professionals — people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.

Datasheet

Mme-Pdfs-Image

Specifications