Fluke 753 Documenting Process Calibrator

Fluke 753 Documenting Process Calibrator

Fluke-753 Documenting Process Calibrator helps you work smarter and faster

The Fluke 753 is an advanced multifunction documentation calibrator that allows you to download software-generated routines, lists, and instructions and transfer the data for printing, archiving, and analysis. You will find that it works with multiple instruments, with simultaneous generation and measurement capabilities for all common process parameters.

Acquires simulates, and measures pressure, temperature, and electrical signals in a rugged, portable calibration tool. It also automates calibration procedures captures data for documentation and helps meet stringent standards such as ISO 9000, FDA, EPA, and OSHA regulations.

In order to support two-way communication with DPCTrack 2 and other instrumentation management programs, the 753 comes with a USB interface and a USB communication cord. Consider using Fluke DPCTrack2 Calibration Management software with your Fluke 753 and 754 calibrators, or even older Fluke 743 and 744 calibrators, to build a seamless, paperless calibration management system.

The Fluke753 and 754 Introduction

To get more information please contact us mme.

Fluke 753 Process Calibrator Features

• Full-featured documenting process calibrator for calibrating and troubleshooting
• Measures volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters, and other instruments
• Sources and simulate volts, mA, pressure, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
• Powers transmitters during the test using a loop supply with simultaneous mA measurement

Fluke 753 Specifications

• Measurement Accuracy Voltage DC (Range): 100.000 mV, 3.00000 V, 30.0000 V,  300.00 V
• Measurement Accuracy Voltage AC (Range): 3.000 V (40 Hz to 500 Hz) / 0.001 V, 30.00 V (40 Hz to 500 Hz) / 0.01 V, 300.0 V (40 Hz to 500 Hz) / 0.1 V
• Measurement Accuracy Current DC (Range): 30.000 mA, 110.00 mA
• Measurement Accuracy Resistance (Range) : 10.000 Ω  , 100.00 Ω , 1.0000 kΩ , 10.000 kΩ
• Measurement Accuracy Frequency( Range): 1.00 to 110.00 Hz / 0.01 Hz, 110.1 to 1100.0 Hz / 0.1 Hz,1.101 to 11.000 kHz / 0.001 kHz,11.01 to 50.00 kHz / 0.01 kHz
• Data log functions (Measure functions): Voltage, current, resistance, frequency, temperature, pressure
• Data log functions (Reading rate ): 1, 2, 5, 10, 20, 30, or 60 readings/minute
• Ramp functions (Source functions):  Voltage, current, resistance, frequency, temperature
• Ramp functions(Rate): 4 steps/second
• Size 136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in)
• Weight 1.2 kg (2.7 lb)
• Batteries Internal Battery Pack Li-ion: 7.2 V, 4400 mAh, 30 Wh

 Accessories

• Fluke BC7240 Battery charger/Eliminator for 75x
• Fluke BP7240 Li-Ion Battery Pack for 75x
• Fluke C550 Tool Bag
• Fluke AC220 SureGrip™ Alligator Clips
• Fluke 700 PMP Pressure Pump
• Fluke 700PTPK2 Pneumatic Test Pressure Kit
• Fluke 700HTPK2 Hydraulic Test Pressure Kit
• Fluke 700LTP-1 Low-pressure Test Pump
• Fluke 700HTH-1 Hydraulic Test Hose
• Fluke 700TTH5K Premium Transmitter Test Hose Kit
• Fluke 700TTH10K Premium Transmitter Test Hose Kit

Related Products

Fluke 754, Fluke 750SW DPCTrack2 Calibration Management Software, Fluke 718,Fluke 750p series