![Fluke 87V TRMS](https://mme-ae.com/wp-content/themes/woodmart/images/lazy.png)
![buy Fluke 87v 1](https://mme-ae.com/wp-content/themes/woodmart/images/lazy.png)
![buy Fluke 87vMultimeter](https://mme-ae.com/wp-content/themes/woodmart/images/lazy.png)
![Fluke 87v](https://mme-ae.com/wp-content/themes/woodmart/images/lazy.png)
Fluke 87V TRMS Industrial Multimeter key features:
AED 1,800 Original price was: AED 1,800.AED 1,750Current price is: AED 1,750. (excl.VAT)
The Fluke 87V TRMS Multimeter offers the decision and accuracy to effectively troubleshoot motor drives, plant automation, energy distribution, and the electromechanical system even in loud, excessive power, and excessive altitude locations. Multimeter fluke 87v takes the guesswork out of power device troubleshooting. This electric multimeter
consists of a completely unique characteristic as it should be measuring noise on the VFD and on the motor terminals. Special protection blocks excessive frequency, and excessive-power noise generated via way of means of massive power systems. The Fluke eighty Series V of virtual multimeters have progressed size functions, troubleshooting features, decision, and accuracy to clear up greater issues on motor drives, in plant automation, energy distribution, and electro-mechanical system.
If a check lead is plugged into the mA/μA or A terminal, however, the rotary transfer isn’t always set to the right cutting-edge position, the beeper warns you with the aid of using creating a chirping sound, and the show flashes “LEAd”. This caution is meant to forestall you from trying to degree voltage, continuity, resistance, capacitance, or diode values whilst the leads are plugged right into a cutting-edge terminal
CautionsPlacing the probes across (in parallel with) a powered circuit while a lead is plugged right into a modern-day terminal can harm the circuit you’re trying out and blow the Meter’s fuse. This can appear due to the fact the resistance via theMeter’s modern-day terminals could be very low, so the Meter acts like a quick circuit
The Fluke 87V TRMS is equipped with an ac low pass filter. When measuring ac voltage or ac frequency, press A to set off the low byskip clear-out mode (K). The Meter maintains measuring withinside the selected ac mode, however, now the sign diverts thru a clear-out that blocks undesirable voltages above 1 kHz.
The decreased frequency voltages pass with decreased accuracy to the dimension underneath 1 kHz. The low pass clear-out can enhance dimension overall performance on composite sine waves which are commonly generated by inverters and variable frequency motor drives.
The analog bar graph features just like the needle on an analog meter, however without the overshoot. The bar graph updates forty instances consistent with the second.
Because the graph responds 10 instances quicker than the virtual display, it’s far more beneficial for making top and null changes and staring at hastily converting inputs. The graph isn’t always proven for capacitance, frequency counter features, temperature, or top min max.
The AutoHOLD mode captures the prevailing studying at the display. When a new, strong studying is detected, the Meter beeps and presentations the new studying. To input or go out of AutoHOLD mode.
fluke 87 v digital multimeter as it should be degree distorted waveforms, however, whilst the enter leads are shorted collectively withinside the AC functions, the meter shows a residual analyzing among 1 and 30 counts.
When the take a look at leads are open, the show readings might also additionally differ because of interference. These offset readings are normal. They do now no longer have an effect on the Meter’s AC size accuracy over the required size ranges. Unspecified enter degrees are:
You must be logged in to post a review.
Specifications
Category | Specifications |
---|---|
Voltage DC | Maximum voltage: 1000 V Accuracy: ±(0.05% + 1) Maximum resolution: 10 µV |
Voltage AC | Maximum voltage: 1000 V Accuracy: ±(0.7% + 2) True RMS AC bandwidth: 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum resolution: 0.1 mV |
Current DC | Maximum amps: 10 A (20 A for 30 seconds maximum) Accuracy: ±(0.2% + 2) Maximum resolution: 0.01 µA |
Current AC | Maximum amps: 10 A (20 A for 30 seconds maximum) Accuracy: ±(1.0% + 2) True RMS Maximum resolution: 0.1 µA |
Resistance | Maximum resistance: 50 MΩ Accuracy: ±(0.2% + 1) Maximum resolution: 0.1 Ω |
Capacitance | Maximum capacitance: 9,999 µF Accuracy: ±(1% + 2) Maximum resolution: 0.01 nF |
Frequency | Maximum frequency: 200 kHz Accuracy: ±(0.005% + 1) Maximum resolution: 0.01 Hz |
Duty cycle | Maximum duty cycle: 99.9% Accuracy: ±(0.2% per kHz + 0.1%) Maximum resolution: 0.1% |
Temperature measurement | Range: –200.0 °C – 1090 °C –328.0 °F – 1994.0 °F (excluding probe) 80 BK temperature probe: –40.0 °C – 260 °C, –40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater |
Conductance | Maximum conductance: 60.00 nS Accuracy: ±(1.0% + 10) Maximum resolution: 0.01 nS |
Diode | Range: 3 V Resolution: 1 mV Accuracy: ±(2% + 1) |
Category | Specifications |
---|---|
Operating temperature | –20 °C to + 55 °C |
Storage temperature | –40 °C to + 60 °C |
Humidity (without condensation) | 0% – 90% (0 °C – 35 °C), 0% – 70% (35 °C – 55 °C) |
Operating altitude | 2000 m |
Category | Specifications |
---|---|
Overvoltage category | EN 61010–1 to 1000 V CAT III, 600V CAT IV |
Agency approvals | CE, CSA, RCM |
Category | Specifications |
---|---|
Size | 201 x 98 x 52 mm (with holster) |
Weight | 355 g 624 g with holster |
Display | Digital: 6000 counts updates 4/sec, 19,999 counts in high–resolution mode Analog: 32 segments, updates 40/sec Frequency: 19,999 counts, updates 3/sec at > 10 Hz |
Warranty | Lifetime |
Battery life | Alkaline, ~400 hours typical, without backlight |
Shock | 1 Meter drop per IEC 61010–1:2001 |
Vibration | Per MIL–PRF–28800 for a Class 2 instrument |
In stock
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an Account
Kayden –
Perfect meter that is full functioned for testing. Portable and fairly rugged for all kinds of duty.