![fluke networks ts30](https://mme-ae.com/wp-content/themes/woodmart/images/lazy.png)
![Fluke i400s](https://mme-ae.com/wp-content/themes/woodmart/images/lazy.png)
Fluke i2000 Flex AC Current Clamp
The Fluke i2000 Flex AC Current Clamp is a highly versatile and efficient tool designed for non-intrusive current measurement across a wide range of applications. Utilizing the Rogowski (air-cored coil) principle, this clamp is especially suitable for measuring AC currents up to 2000 A.
Call for Price
We are not Supporting COD Payments Terms Outside UAE
Fluke i2000 Flex AC Current Clamp
The Fluke i2000 Flex AC Current Clamp is a highly versatile and efficient tool designed for non-intrusive current measurement across a wide range of applications. Utilizing the Rogowski (air-cored coil) principle, this clamp is especially suitable for measuring AC currents up to 2000 A. It features a flexible and lightweight measuring head which can be easily maneuvered into hard-to-reach areas, making it ideal for complex electrical setups or large conductors.
Fluke i2000 Features
- Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
- Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
- Maximum conductor diameter 178 mm
- CAT III 600 V safety rating
Fluke i 2000 Specifications:
Electrical specifications | |
Current ranges | 20 A 200 A 2000 A AC rms |
Output sensitivity (AC-coupled) | 1 mV 10 mV 100 mV 1 mV per A |
Load impedance | 100 kΩ minimum |
Accuracy | at +25°C ±1% of range (45 Hz to 65 Hz) |
Linearity | 10% to 100% of range ±0.2% of reading |
Noise | 8 mV AC rms (30 A) 2 mV AC rms (300 A, 3000 A) |
Frequency range | 10 Hz to 20 kHz (-3 dB) |
Phase error | < ±1° (45 Hz to 65 Hz) ±10° (at 20 kHz) |
Position sensitivity (with cable > 25 mm from the coupling) | ![]() Position sensitivity: From 1% up to 3% of range with cable, depending on distance from the center (see figure left). Measurements closer than 25 mm from the coupling are typically greater than 3% of range. External wire influence: 1% (-40 db) of external current >200 mm from head. |
External field | with cable > 200 mm from the head ±1% of range |
Power supply | 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator |
Temperature Coefficient | ±0.08% of reading per °C |
Working voltage | see Safety standards section 600 V AC rms or DC |
General Specifications | |
Head Circumference | 610 mm (24 in) |
Head cable diameter | 14.3 mm (0.56 in) |
Head bend radius | 38.1 mm (1.5 in) |
Cable length (head to electronics) | 2 m (6.56 ft) |
Output connection | Molded 4 mm safety plugs (not integrated) |
Operating temperature range | 0°C to +70°C (32°F to 158°F) (head and electronics) |
Storage temperature range | -40°C to +105°C (-40°F to 221°F) (head) -20°C to +85°C (-4°F to 185°F) (electronics) |
Operating humidity | 15% to 85% (non-condensing) |
Weight | 180 g (6.34 oz) (head) 190 g (6.70 oz) (electronics) |
Safety standards | EN 61010-031: 2002 EN 61010-2-032: 2002 EN 61010-1: 2001 600 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz. |
EMC standards | EN 61326: 1998 +A1, A2, and A3 |
Dimensions (H x W x D) | 116 x 68.5 x 30 mm (4.56 x 2.69 x 1.18 in) |
You must be logged in to post a review.
Brand
Fluke
![Fluke logo brand](https://mme-ae.com/wp-content/themes/woodmart/images/lazy.png)
Related Products
Fluke 368 FC Leakage Current Clamp Meter
In stock
Fluke 375 AC/DC Clamp Meter
In stock
Fluke 233 Remote Display Digital Multimeter
In stock
FLUKE 902 FC True-RMS HVAC Clamp Meter
In stock
Reviews
Clear filtersThere are no reviews yet.