MOHAMMAD MAHDI Electronics Trading LLC
All Megger Products
Megger authorization
Call for price
The Megger SPI225 is a smart primary injection test system delivering up to 2000 A continuous (4000 A short-time) for high-current commissioning and testing of circuit breakers, CTs, ground-fault systems and relays. A Smart Touch View Interface and precise timer make injection testing fast and repeatable.
Call for price
The Megger MLLF is a low-level filter accessory that conditions and filters the low-level Rogowski and voltage-generator outputs of Megger SMRT and FREJA relay test sets for accurate, low-noise signal injection.
Call for price
The Megger PS9130 and PS9160 are high-current universal circuit breaker test sets for low-voltage power and molded-case breakers. Delivering up to 4,500 A (PS9130) or 6,250 A (PS9160) continuous — with instantaneous currents to 100,000 A — they verify trip characteristics with automated PLC-2000 control.
Call for price
The Megger PSI700A is a passive five-lamp phase sequence indicator that shows the rotation direction of a three-phase supply and confirms all three phases are live. Working over 90–600 V with no batteries or moving parts, it also identifies an open phase — a simple, rugged CAT III 600 V tool.
Call for price
The Megger PS9116 is a microprocessor-based high-current circuit breaker test set delivering up to 1,600 A continuous (to 19,200 A instantaneous). It tests low-voltage air-frame and molded-case breakers, overload relays and CT ratios, with a precision digital timer and automated PLC-2000 control.
Call for Price
The Megger 560060 is a battery-powered motor and phase rotation tester that determines the rotation direction of single-, two- and three-phase motors before they are connected, and checks phase sequence and polarity on supplies up to 600 V AC without hazardous temporary connections.
Call for price
The Megger 830220-1 is a battery-operated cable phasing meter for underground distribution systems, connecting to the capacitive test points on elbow connectors to measure voltage, determine phase rotation and phase out cables up to 30 kV safely at low voltage.
Call for price
The Megger ODEN AT is a high-current primary injection test system for commissioning and maintaining protection schemes. A single unit delivers up to 1000 A continuously (peaks to several kA) and units can be paralleled for even higher current, with a built-in timer and full electrical measurement.
Call for price
The Megger OTD is an automatic oil tan delta test set that measures the dissipation factor (tan δ), relative permittivity and resistivity of insulating oils. With an integrated IEC 60247 test cell, heating to 110 °C and 16 built-in standards, it delivers precise oil-quality diagnostics for transformers and HV equipment.
Call for price
The Megger OTS PB and OTS AF ranges are automatic oil breakdown-voltage test sets for insulating oils. The portable, battery-capable PB models (60/80 kV) and fully automatic AF models (60/80/100 kV) run standardised dielectric-strength tests to IEC 60156, ASTM and other standards with built-in printer and PowerDB software.
Call for price
The Megger BA-185 is a rugged, portable current-transformer burden ammeter with switch-selected 1.25–10 A ranges and a clear 64 mm analogue meter, used to field-test CT installations for shorted turns, high-resistance connections and grounding faults.
Call for price
The Megger MAGNUS is a portable step-up transformer for instrument-transformer testing — preparing CT excitation curves, demagnetising CT cores and performing VT turn-ratio tests, with a variable output up to 2200 V.
Call for price
The Megger EasyTest 20 kV is a portable VLF (0.1 Hz) and DC cable test system with 20 kV output for after-lay and after-repair testing of medium-voltage cables, plus sheath testing.
Call for price
The Megger E-Z Test 99800 Series meter test jacks simplify and add safety to testing socket-type watthour meters, with dead-front construction, lever-actuated cams and a heavy-duty bypass bus. Four types cover most common meters.
Call for price
The Megger MV DAC30 is a portable 30 kV damped-AC (DAC) test and diagnostic system that identifies, evaluates and locates partial-discharge faults in medium-voltage cable insulation and accessories, for both commissioning to IEEE 400.4 and condition monitoring of aged circuits.
Call for price
The Megger EasyTest 20 kV is a portable VLF (0.1 Hz) and DC cable test system with 20 kV output for after-lay and after-repair testing of medium-voltage cables, plus sheath testing.
Call for price
The Megger T26/1 DC high voltage test sets are mobile, modular systems for HV DC testing of cables and installations, with output up to 350 kV, 600 kV or 800 kV at load (A/B/C models).
Call for price
The Megger HV Tester 25 is a compact, battery-powered high voltage generator with a variable 0–25 kV negative DC output for insulation and electrical-strength testing without external power.
Call for price
The Megger Tan Delta attachment adds dissipation-factor (tan δ) measurement to VLF sine cable test systems, letting engineers assess cable-insulation condition and ageing during VLF testing. It measures tan δ from 1×10⁻⁴ with automatic interpretation to IEEE 400.2 and leakage-current correction.
Call for price
The Megger HV Test Set 50 kV is a portable DC high voltage test set for proof testing of cables and equipment, with 0–50 kV negative-polarity output at up to 6 mA.
Call for price
The Megger Diagnostic Connection Set provides a PD-free, low-noise connection to the test object for offline partial discharge (PD) and tan delta cable diagnostic measurements.
Call for price
The Megger MVCT is a lightweight, automated analyzer for testing current and voltage (instrument) transformers. It measures ratio, phase angle, winding resistance, burden, polarity and saturation — with knee-point voltages up to 30 kV using a DC technique — to IEC 61869 and IEEE C57.13, all from a portable 10 kg unit.
Call for price
The Megger VLF Connection Set is a withstand-test accessory that provides a safe, tight and partial-discharge-free connection between Megger VLF cable testers and the cable under test, with adapters for elbows and T-bodies so testing and PD diagnosis can be performed through the terminations.
Call for price
Megger HFCT high frequency current transformers are partial discharge (PD) sensors — permanent and split-core — fitted around cable earth connections to decouple PD signals from MV to EHV.
Call for price
The Megger TXL extra load units (TXL830–TXL890) add load current to TORKEL battery test systems for constant-current and constant-power discharge tests, up to several kA combined.
Call for price
The Megger MRCT is a fully automatic current transformer test set that performs ratio, saturation, polarity, winding resistance, insulation, burden and phase-deviation tests to IEC 61869 and IEEE C57.13, with a colour touchscreen controller.
Call for price
The Megger OCR15D is a self-contained, mobile test set for verifying the operation of automatic oil circuit reclosers. Delivering up to 2000 A output with a precision digital timer and colour touchscreen, it performs minimum-trip, time-current and sequence testing on single- and three-phase direct-acting reclosers.
Call for price
The Megger VIDAR is a portable vacuum interrupter tester that applies a DC high voltage of up to 60 kV to check the vacuum integrity of vacuum circuit breakers in MV switchgear, giving a simple green/red pass-fail verdict without dismantling the interrupter.
Call for price
The Megger INGVAR is a portable primary current injection test system for testing protective relays and circuit breakers and measuring CT turns ratio, generating high variable currents.
Call for price
The Megger DDA-3000 and DDA-6000 are high-current universal circuit breaker test sets for primary-injection testing of low-voltage power and moulded-case breakers with thermal, magnetic or solid-state trips, delivering up to 35,000 A (DDA-3000) or 60,000 A (DDA-6000) under DSP digital control.
Call for price
The Megger DDA-1600 is a primary-injection circuit breaker test set for low-voltage power breakers up to 1600 A frame size, delivering up to 19,200 A to air-frame breakers under DSP digital control, with NEMA AB-4 compliance and DDA-1 digital data acquisition.
Call for price
The Megger TM1800 is a modular, PC-based circuit breaker analyzer system for timing, motion, coil current and dynamic resistance testing of HV circuit breakers, with DualGround safety so both sides of the breaker stay grounded throughout the test.
Call for price
The Megger TM1700 is a modular high-voltage circuit breaker analyzer for timing, motion, coil-current and dynamic resistance testing. With six timing channels, optional analog/travel and SDRM resistance measurement, and CABA Local touchscreen or CABA Win PC control, it delivers precise breaker condition assessment.
Call for price
The Megger 210170 is a rugged hand-cranked analog insulation resistance tester that needs no batteries, offering 100, 250, 500 and 1000 V test voltages, insulation readings up to 20,000 M-ohm, a 0-5000 ohm continuity range and AC voltage measurement to 600 V.
Call for price
The Megger SDRM202 is a static and dynamic resistance measurement (SRM/DRM) accessory for the TM1800, TM1700 and EGIL breaker analysers. Injecting up to 500 A DC, it measures main-contact resistance during breaker operation to reveal arcing-contact wear without dismantling the breaker.
Call for price
The Megger SDRM201 is a static and dynamic resistance measurement (SRM/DRM) accessory for circuit-breaker testing with the EGIL breaker analyser. Injecting up to 500 A DC, it measures the resistance of the main contacts during operation, revealing arcing-contact wear without dismantling the breaker.
Bench Multimeters