Fluke 376 FC Clamp Meter

The Fluke 376 FC True-RMS Clamp Meter with iFlex is industrial and commercial electricians’ most advanced troubleshooting tool. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend, and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.

fluke 376 review

The 376 FC clamp meter uses an integrated low-pass filter to accurately measure non-linear signals, such as adjustable speed drives, electronic ballasts, and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out the noise and capture the motor starting current exactly as the circuit protection sees it.

Fluke 376 FC True-rms Clamp Meter

fluke-376 fc/wwg

• Measure:

• Voltage to 1000 V AC or DC
• Resistance to 60 kΩ with continuity detection
• Min, max, average, and inrush recording to capture variations automatically
• 500 mV DC measurement range to interface with other accessories
• 1000 μF capacitance measurement

Fluke 376 fc true rms clamp meter with iflex

The new Fluke 376 Clamp Meter offers improved performance that’s perfect for a variety of today’s measurement situations. With true RMS AC current and voltage measurements, the Fluke 376 can measure up to 1000V and 1000A in both AC and DC modes. In addition, the Fluke 376 includes the new iFlex flexible current probe, which extends the measurement range to 2500 A AC while providing greater viewing flexibility, the ability to measure around awkward conductors and better cable access. The Fluke 376 is a direct replacement for the Fluke 337 Clamp Meter.

Fluke 376 fc true-rms clamp meter with iflex

Fluke 376 True-RMS AC/DC Clamp Meter with iFlex® Extend your measurement range with greater flexibility. The Fluke 376 true-rms clamp meter with iFlex® lets you test around odd-sized conductors and extend the measurement range to 2500 A AC.

other products

You can check our other products like Fluke 369 FC True-RMS AC Clamp Meter, and Fluke 375 FC True-RMS AC/DC Clamp Meter and buy clamp meter fluke on our website.

fluke 376 fc specification :

• AC Current Range (Jaw): 999.9 A
• AC Current( Flexible Current Probe )Range : 2500 A
• DC Current Range: 999.9 A
• AC Voltage Range: 1000 V
• DC Voltage Range: 1000 V
• mV dc Range : 500.0 mV
• Amps Frequency ( Jaw ) Range: 5.0 Hz to 500.0 Hz
• Amps Frequency(Flexible Current Probe) Range:5.0 Hz to 500.0 Hz
• Resistance Range: 60.00 kΩ
• Capacitance Range: 1000 μF
• Size (L x W x H) : 249 mm x 85 mm x 45 mm
• Weight (with Batteries): 395 g
• Operating Temperature: -10 °C to 50 °C
• Storage Temperature: -40 °C to 60 °C

fluke 376 fc accessories

• Fluke C33 Soft Carrying Case
• Fluke CAMO-37 Camouflage Carrying Case
• Fluke C150 Soft Carrying Case
• Fluke AC220 SureGrip™ Alligator Clips
• Fluke AC87 Heavy Duty Bus Bar Clip Set
• Fluke AC89 Heavy Duty Insulation Piercing Test Clip
• Fluke TL75 Hard Point™ Test Lead Set
• Fluke TP1 Slim Reach Test Probes
• Fluke TL175 TwistGuard™ Test Leads
• Fluke LVD1A Non-Contact Voltage Tester with LED Flashlight
• Fluke L206 Deluxe LED Hat Light
• Fluke 376 fc calibration manual
• Fluke 376 fc manual