MOHAMMAD MAHDI Electronics Trading LLC
All Megger Products
Megger authorization
Call for price
The Megger Centrix 2.0 is a modern, powerful cable test van system for fast, non-destructive fault location up to 33 kV, combining VLF testing, PD diagnosis and a full suite of pre-location and pinpointing methods.
Call for price
The Megger KC-C cable reels are lighter, updated wind-turbine test leads for the DLRO2’s long-lead mode, with a 100 m reel weighing just 7.6 kg and gold-plated Kelvin probes.
Call for price
The Megger KC series test leads are long (30/60/100 m), 10 A-rated lead sets for continuity testing of lightning-protection conductors in wind turbines, on site or in manufacturing.
Call for price
The Megger MFT1845+ is the flagship MFT1800 tester with TrueLoop™ confidence-meter loop testing, RCD Types AC/A/S/B plus EV, stakeless/ART earth testing, 1000-result memory and Bluetooth download.
Call for price
The Megger Digital Hydrometer Kit measures the specific gravity and temperature of flooded battery cells in five seconds, storing up to 1024 results with an 8-channel data logger.
Call for price
The Megger DLRO duplex four-terminal test lead system provides interchangeable Kelvin clips and duplex probes with selectable 1.5 m, 3 m and 6 m leads for convenient, accurate low-resistance testing with the DLRO10 range of ohmmeters.
Call for Price
The Megger BGFT is a dual-range battery ground fault tracer that identifies, traces and locates ground faults in ungrounded DC systems, with an adjustable 20 Hz test signal that works even in high electrical-noise environments.
Call for price
The Megger EST high voltage discharge rods provide damped discharge and visible earthing of HV cables and test units, in six versions from 35 kV to 150 kV, complying with EN 50191/61230/61219.
Call for Price
The Megger PMM-1 is a three-phase power multifunction measuring instrument that measures voltage, current, power, reactive power, power factor, phase angle, frequency and harmonics to the 49th. With three channels, ±0.05% voltage accuracy and 0.08° phase resolution, it is ideal for relay testing and power monitoring.
Call for price
The Megger TC3231 is a rugged entry-level thermal imaging camera with a 32×31 IR detector and a -20 to 300 °C range. With six colour palettes, hot/cold spot tracking, visual-thermal image blending and a 2.2-inch display, it is a practical, affordable tool for electrical and mechanical troubleshooting.
Call for price
The Megger MTB7671/2 Instrument Test Box lets you quickly verify the accuracy of installation testers between calibrations. It provides known reference values for continuity, insulation resistance, loop impedance and RCD trip testing, helping electricians confirm their instruments meet NICEIC, ELECSA and other scheme requirements.
Call for price
The Megger DLRO-H200 is a hand-held battery micro-ohmmeter delivering up to 220 A with DualGround safety, measuring 0 to 1000 mΩ with Bluetooth download, weighing just 1 kg.
Call for price
The Megger AVO830 is a high-end True-RMS digital multimeter with a dual display and analogue arc, 0.1% basic accuracy, phase-sequence testing, non-contact voltage detection and CAT IV 600 V safety for demanding electrical work.
Call for price
The Megger AVO835 is a high-end 10,000-count True-RMS digital multimeter with dual display and analogue arc, 0.1% accuracy, phase-sequence testing, switchable input impedance, an 800 Hz low-pass filter and temperature measurement.
Call for price
Megger offers a complete line of BITE accessories — probe extensions, leads, probes, a digital hydrometer, calibration shunts, extension cables and ProActiv software — to extend the capabilities of the BITE battery impedance test range.
Call for price
The Megger BITE Receiver is a direct replacement receiver for the original BITE battery impedance test set, combining potential leads, a clamp-on current sensor and storage for 2000+ data sets (cell impedance, voltage and strap resistance) in one unit.
Call for Price
The Megger BITE3 determines the health of lead-acid cells up to 2000 Ah, measuring cell impedance, voltage, strap resistance, ripple and float current, with a built-in spectrum analyser and storage for over 1 million cell readings.
Call for price
The Megger Mjölner 600 is a 600 A micro-ohmmeter with patented DualGround safety, measuring contact and joint resistance down to microhms — ideal for testing large circuit breaker contacts, busbar joints and high-current connections with both sides grounded.
Call for price
The Megger AVO410 is a rugged True-RMS electrician’s digital multimeter with a 6000-count display and CAT IV 600 V safety, measuring AC/DC voltage and current, resistance, capacitance and frequency for industrial diagnostics.
Call for price
The Megger Mjölner 200 is a 200 A micro-ohmmeter with patented DualGround safety, measuring contact and joint resistance down to microhms — ideal for testing circuit breaker contacts, busbar joints and high-current connections with both sides grounded.
Call for price
The Megger DLRO10 is a rugged 10 A digital low resistance ohmmeter (DUCTER) measuring 0.1 µΩ to 2000 Ω with ±0.2% accuracy and automatic forward/reverse averaging.
Call for price
The Megger NIM1000 is a network/neutral impedance meter that measures grid impedance, resistance, reactance and neutral (ZPEN) values under real load using test currents up to 1000 A. It helps detect load-sensitive and neutral faults and assess power quality, all from a portable, sunlight-readable instrument.
Call for price
The Megger LTW335 is the top of the LTW range, adding on-board result storage and downloading to maxZ and (R1+R2), for fast, accurate non-tripping earth-loop testing with full record-keeping across a 50–440 V range.
Call for price
The Megger LRCD210 is a combined loop impedance and RCD tester with ½×I, 1×I and 5×I trip tests plus ramp testing. UK Part P compliant, it verifies installations to EN 61557 in one rugged handheld unit.
Call for price
The Megger BGL detects, monitors and locates ground faults on battery systems up to 260 V DC without segmenting, reading fault resistance directly (1 Ω–100 kΩ) and distinguishing resistive faults from capacitive load current.
Call for price
The Megger EVCA210 is a charge-point adaptor for safely testing Mode 3 AC electric vehicle charge points, simulating PP/CP states and fault conditions to IEC 61851-1 and 60364-7-722.
Call for price
The Megger 100 A Kelvin Clamp is a shatterproof four-wire (Kelvin) test clamp with a 75 mm expandable jaw, rated 100 A continuous and 15 kV / 500 mA AC, for connecting almost any test instrument to any size of specimen.
Call for price
The Megger Tinsley gauge is a simple, pocket-sized dry-film thickness gauge that measures nonmagnetic coatings — paint, plastic, zinc or chromium plating — over a ferrous base. Using a magnetic pull-off method it reads 5–500 µm (0.2–15 mils) nondestructively, with no setup and no power required.
Call for price
The Megger GTS-300 is a two-piece high-current safety ground tester delivering up to 300 A continuous (600 A intermittent) to verify grounding-system integrity and personal safety grounds.
Call for price
The Megger ETK100C (1010-180) is a 100 m earth-test cable and clamp kit with two 100 m and two 60 m reeled leads, four earth spikes, plus the MVC1010 voltage and MCC1010 current clamps for stakeless testing with the Megger DET2/DET3/DET4 range.
Call for price
The Megger ETK50C (1010-179) is a 50 m earth-test cable and clamp kit with 50 m and 30 m reeled leads, four earth spikes, plus the MVC1010 voltage and MCC1010 current clamps for stakeless (clamp) earth measurements with the Megger DET2/DET3/DET4 range.
Call for price
The Megger DET3TC is a 3-terminal earth resistance tester supporting 2-pole, 3-pole and no-disconnect (ART) clamp testing from 0.01 Ω to 2000 Ω, with automatic spike-status checks and CAT IV 100 V safety.
Call for price
The Megger TPT420 is a rugged CAT IV 1000 V two-pole voltage tester with combined LED and LCD indication, measuring 12 to 1000 V AC / 12 to 1500 V DC, with continuity, phase-rotation and single-pole testing for electricians and maintenance engineers.
Call for price
The Megger DETEX series is a range of high-voltage detectors and phasing testers covering 2.3 kV to 550 kV, with optional piezo verifiers, for safe voltage checking on grounded and ungrounded AC systems.
Bench Multimeters