MOHAMMAD MAHDI Electronics Trading LLC
All Megger Products
Megger authorization
Call for price
The Megger S1-568/2 is a high-performance 5 kV diagnostic insulation resistance tester measuring up to 15 TΩ. It offers IR, PI (with predictor), DAR, DD, stepped-voltage and ramp tests, a powerful guard terminal, adaptive noise filtering and CertSuite connectivity in a compact 4.5 kg instrument.
Call for price
The Megger S1-1568 is a 15 kV diagnostic insulation resistance tester for high-voltage assets. Measuring up to 35 TΩ with IR, PI, DAR, DD, SV and ramp tests, strong noise immunity and a guard terminal, it delivers dependable diagnostics on cables, machines, transformers and bushings.
Call for price
The Megger T22/1 is a compact, portable AC high-voltage test system for dielectric withstand testing up to 75 kV. Its SF6-insulated test transformer and separate control unit make on-site hipot testing of switchgear, cables and low-capacity test objects practical, with an optional DC rectifier to 80 kV.
Call for price
The Megger Resonating Inductor extends the capacitance and dissipation-factor range of DELTA-series tan delta test sets. Connected in parallel, its hand-cranked adjustable inductance resonates with high-capacitance loads — testing up to 1 µF at 10 kV on cables, motors, generators and transformers.
Call for price
The Megger Easyloc RxTx (Ord. 890005617-S) is a transmitter-and-receiver cable and pipe locating system with semi-automatic sensitivity and one-touch depth measurement for safe groundwork.
Call for price
The Megger IDAX322 uses Dielectric Frequency Response (DFR/FDS) to measure capacitance, tan delta and oil conductivity for insulation diagnostics on transformers, bushings and instrument transformers.
Call for price
The Megger PIL 8 identifies phases in earthed and short-circuited medium-voltage cables without removing the grounding. Using battery-free transceiver clamps and a 3 kHz audio-frequency generator, it lets crews positively match phases across cable ends safely, in line with EN 50110-1.
Call for Price
The Megger GTS-300 is a two-piece high-current safety ground tester delivering up to 300 A continuous (600 A intermittent) to verify grounding-system integrity and personal safety grounds.
Call for price
The Megger MMG10 is a cable sheath tester and fault locator delivering up to 10 kV DC for voltage-testing PE and PVC cable sheaths, locating sheath faults and detecting earth-leakage faults on shielded plastic-insulated cables.
Call for price
The Megger MFM10 is a portable cable sheath fault location system that combines 0–10 kV bipolar sheath testing with pulsed A-frame pinpointing, locating jacket faults to ±0.1% of cable length.
Call for Price
The Megger Geolux GL 660-1 locates earth faults in ungrounded (IT) power, control and signal systems using a 5 Hz test generator with a reader clamp and identification tongs.
Call for price
The Megger ESG NT is a digital ground and cable-sheath fault locator that uses the step-voltage method with earth spikes to pinpoint sheath faults on low-voltage networks, often without interrupting supply.
Call for price
The Megger SWG 505 is a 5 kV, 500 J surge wave generator for pinpointing faults on low-voltage underground cables. By igniting an arc at the fault, it produces acoustic and electromagnetic signals that ground-microphone receivers can locate — a compact, lightweight thumper for LV cable crews.
Call for price
The Megger SWG 500 is a 16 kV, 500 J surge wave generator for pinpointing faults on underground cables. By igniting an arc at the fault, it produces acoustic and electromagnetic signals that ground-microphone receivers can locate. Three voltage ranges and DC testing make it a versatile field thumper.
Call for price
The Megger SWG 1750 is a modular 2–32 kV surge wave generator delivering up to 1750 J (3500 J on the CD model) for high-energy pre-location and pinpointing of underground cable faults.
Call for price
The Megger IDAX300 uses Dielectric Frequency Response (DFR/FDS) to measure moisture content, tan delta and oil conductivity in power transformer, bushing and CT insulation.
Call for price
The Megger HPG-H series are compact, modular AC and DC high-voltage test systems with maintenance-free cast-resin transformers, delivering up to 110 kV DC / 78 kV AC (HPG110-H) for cable, switchgear and HV-component testing.
Call for price
The Megger HPG-D series are compact, modular AC and DC high-voltage test systems with maintenance-free cast-resin transformers, delivering up to 160 kV DC / 58 kV AC (HPG80-D) for testing cables, switchgear and HV components.
Call for price
The Megger HPG35, HPG50, HPG58 and HPG78 are portable AC high-voltage test sets for AC withstand (hipot) testing of switchgear, instrument transformers and MV components, with maximum AC outputs from 35 to 78 kVrms and a separate control unit for safe-distance operation.
Call for price
The Megger STX40 is a portable cable fault location system for LV and MV cables. It combines DC testing to 40 kV, surge (thumping) to 32 kV with 2000 J, and TDR, arc reflection, ICE and decay prelocation, all controlled from a sunlight-readable 10.1-inch touchscreen with a single rotary knob.
Call for price
The Megger HPA series is a portable, two-piece 50 Hz high-voltage test system delivering up to 100–120 kV AC (HPA 100/110/120) or 130 kV DC (HPA 130), rated 5 kVA continuous with low partial-discharge noise for testing switchgear, cables, bus-bars and transformers.
Call for price
The Megger DELTA4000 Series is a 12 kV variable-frequency tan delta and power factor test system for diagnosing the insulation of transformers, bushings, cables, circuit breakers and rotating machines, with patented Individual Temperature Correction and strong on-site noise suppression.
Call for price
The Megger CDAX 605 is a high-precision capacitance and dissipation-factor (tan-delta) measurement instrument for transformers, bushings and insulators, achieving 0.02% capacitance and 0.001% dissipation-factor accuracy over a 5-400 Hz frequency range.
Call for Price
The Megger SPG5-1000 is a compact 5 kV surge generator and cable fault locating system for low-voltage distribution networks. It combines DC testing, fault conditioning/burning, ICEplus surge prelocation and acoustic pinpointing — delivering surge energy up to 1000 J to find faults even in branched, multi-T-joint cables.
Call for price
The Megger SmartFuse 2 (SmartFuse 250) is an intelligent electronic fuse system that replaces conventional LV fuses to monitor low-voltage networks in real time, locate cable faults without disconnecting consumers and automatically restore supply, with current up to 250 A.
Call for price
The Megger Smart Thump ST25-30 is a higher-power portable/vehicle-mount cable fault location system for MV cables (11–35 kV). It combines TDR, arc reflection, ICE, DC proof testing to 30 kV and surge (thumping) up to 25 kV with 1600 J, plus automatic fault interpretation on a sunlight-readable display.
Call for price
The Megger Smart Thump ST16-20 is a portable, integrated cable fault location system for medium-voltage distribution cables (11–35 kV). It combines TDR, arc reflection, ICE, DC proof testing and surge (thumping) up to 16 kV with automatic fault interpretation on a sunlight-readable touchscreen.
Call for Price
The Megger SFX32 is a portable cable test and fault location system for LV and MV cables. It combines TDR, arc reflection (ARM), ICE, decay, surge (1750 J) and DC test/burning up to 32 kV with a touchscreen Teleflex SX reflectometer to prelocate, condition and pinpoint cable faults.
Call for price
The Megger Fault Sniffer 2 pinpoints low-voltage underground cable faults by detecting combustion gases from cable sheath burns, using a two-sensor vacuum system without interrupting supply.
Call for price
The Megger HVB10 is a high voltage bridge for accurate fault location on long HV cables — locating cable and sheath faults, sheath testing and pinpointing, with an automatic test sequence.
Call for price
The Megger EZ-Thump 3 kV / 4 kV are highly portable low-voltage cable fault location systems with 500 J surge energy, for fast fault detection on shielded and unshielded cables.
Call for price
The Megger EZ-Thump 12 kV is a compact portable cable fault location system with TDR, arc reflection (4/12 kV) and high-energy surge, using the Easy Go workflow for fast fault finding.
Call for price
The Megger EZ-Restore Overdrive is a portable cable fault location system delivering a 1,100-joule surge at 12 kV, with optional DC breakdown-voltage testing for challenging cable faults.
Call for price
The Megger digiPHONE+2 is a shock-wave (surge) receiver for acoustic and electromagnetic cable fault pinpointing, with up to 30 dB background-noise reduction.
Call for price
The Megger R 30 is a powerful van-mounted cable fault location and diagnostic system for medium- and high-voltage cables. It combines ARM, decay, ICE, surge (2500 J) and VLF methods with a PLC-controlled HV plant, testing to 110 kV (400 kV optional) for prelocation and pinpointing of HV cable faults.
Call for price
The Megger primeon is a fully automated, software-controlled cable fault location and diagnostics system for MV networks. It combines TDR, ARM, surge (thumper), VLF, tan delta and PD methods with motorised HV switching and a touchscreen, so faults are found and pinpointed quickly and safely.
Bench Multimeters