MOHAMMAD MAHDI Electronics Trading LLC
All Megger Products
Megger authorization
Call for price
The Megger SVERKER 780 is a versatile single-phase relay and substation test system delivering up to 250 A and 220 V AC with continuous phase shift and variable frequency (15–550 Hz). Building on the SVERKER 750, it adds frequency-relay testing and enhanced measurement for advanced protection work.
Call for price
The Megger SMRT1D is a compact single-phase relay test system with a built-in 10.1-inch touchscreen. It delivers up to 32 A continuous (60 A peak) and 300 V for testing electromechanical, solid-state and microprocessor relays, with a high-precision timer and RTMS software — no external controller needed.
Call for price
The Megger SPI500 is a compact smart primary injection test system delivering up to 2500 A (6500 A with boosters). It tests circuit breakers, reclosers, ground-fault relays and high-speed fuses, with automatic current regulation, hundreds of built-in breaker curves and a Smart Touch View Interface.
Call for price
The Megger SPI4000 is a high-current smart primary injection test system delivering 4000 A continuous and up to 40,000 A short-time. Built for testing large circuit breakers, switchgear, CTs and protection systems, it pairs huge output with a Smart Touch View Interface and precise timing and metering.
Call for price
The Megger TAU3 is a true three-phase transformer winding analyser that measures turns ratio, winding resistance, polarity and demagnetisation on all three phases from a single lead connection. With 32 A test current, ±0.05% ratio accuracy and a 10.1-inch touchscreen, it speeds up transformer testing dramatically.
Call for price
The Megger VAX020 is a 2 kV high-voltage amplifier that boosts the test voltage of the IDAX insulation diagnostic analyzer from 200 V to 2 kV, enabling accurate capacitance and power-factor measurements in high-interference environments such as HVDC substations.
Call for price
The Megger InsuLogix G2 continuously monitors transformer oil for acetylene (C2H2), hydrogen (H2) and moisture — early indicators of internal faults — with relays, analog outputs and SCADA protocols.
Call for price
The Megger TORKEL 910 is a portable battery load unit for discharge and capacity testing of stationary battery banks in service, delivering up to 110 A at system voltages to 300 V with constant-current, constant-power, constant-resistance and profile discharge modes.
Call for price
The Megger PMM-2 is a four-channel power multimeter with a 10.1-inch touchscreen. It measures voltage to 1000 V, current to 100 A, power, phase angle, frequency and harmonics to the 50th on up to four voltage and four current inputs at once — ideal for relay, meter and substation testing.
Call for price
The Megger EZ-Thump 3 kV / 4 kV are highly portable low-voltage cable fault location systems with 500 J surge energy, for fast fault detection on shielded and unshielded cables.
Call for price
The Megger EZ-Thump 12 kV is a compact portable cable fault location system with TDR, arc reflection (4/12 kV) and high-energy surge, using the Easy Go workflow for fast fault finding.
Call for price
The Megger PD Scan is a lightweight handheld partial discharge scanner for early detection of PD in medium- and high-voltage equipment. It combines TEV, airborne ultrasonic and HFCT measurement in one instrument with a touchscreen, camera and QR scanner for fast, documented surveys of switchgear and cables.
Call for price
The Megger ICM Monitor Portable is a high-precision portable partial discharge (PD) monitoring system for field testing of high-voltage equipment and early detection of insulation defects.
Call for price
The Megger LA-KIT Lamp Adaptor Kit lets electricians access live circuits via standard lamp sockets (B22, B14, E27, E14, GU10) without disturbing fixture wiring, with a lead set and carry case.
Call for price
The Megger MVC1010 is a 1000 A AC clamp with a voltage output, delivering 1 mV per amp across a 1 Ω burden. With a 52 mm jaw, CAT IV 600 V rating and wide 15 Hz–10 kHz bandwidth, it provides accurate non-intrusive current measurement for relay testing, power quality and general electrical work.
Call for price
The Megger ICM System Generation 5 is a modular, scalable partial discharge detection and monitoring system with up to 10 channels, software control and high input sensitivity (<5 pC).
Call for price
The Megger Baker EXP4000 is a dynamic electric motor analyzer that monitors running motors — power quality, voltage, current, torque and efficiency — to reduce failures and downtime.
Call for price
The Megger Baker AWA-IV is an advanced, automated winding analyzer designed to detect insulation and winding faults in electric motors, generators, and transformers before they cause costly failures. With fully automated surge, hipot, and resistance testing, it delivers fast, repeatable results and stores data for easy trend analysis. Its rugged, portable design and intuitive touchscreen interface make it ideal for both field and workshop environments, helping maintenance teams improve reliability and reduce unplanned downtime.
Call for price
The Megger BT51 is a robust low-resistance ohmmeter designed for fast, accurate measurement of high-current, low-resistance connections. With a 2 A test current and 1 mΩ resolution, it’s ideal for testing circuit breaker contacts, switchgear, busbars, and transformer windings. Its rechargeable battery, clear LED display, and rugged design make it perfect for both field and workshop use.
Call for price
The Megger RCD200 is a professional loop impedance and RCD tester for electrical installations. It performs non-trip 3-wire loop testing (0.01 Ω–2 kΩ), RCD trip and no-trip tests at 10–500 mA, and measures voltage, frequency, PFC and touch voltage — all in a rugged CAT III 300 V, IP54 instrument.
Call for price
The Megger LTW335 is the top of the LTW range, adding on-board result storage and downloading to maxZ and (R1+R2), for fast, accurate non-tripping earth-loop testing with full record-keeping across a 50–440 V range.
Call for price
The Megger EVX100 is an EV charger interface for the MFT-X1 multifunction tester, enabling automated testing of Mode 3 single- and three-phase AC charging stations (EVSE).
Call for price
The Megger EVT100 is an all-in-one handheld EV tester combining insulation resistance (50–1000 V), 4-wire low resistance, continuity, diode and DC voltage testing, with CAT III 600 V safety.
Call for price
The Megger IDAX350 is a DFR/FDS insulation diagnostic analyser measuring capacitance, tan delta, moisture and oil conductivity over 1 mHz to 1 kHz, for transformers, bushings and CTs.
Call for price
The Megger CSU600AT is a 600 A high-current supply unit with a built-in timer and analogue ammeter for fast, accurate primary testing of protective relays and current testing of low-voltage circuit breakers and overcurrent devices.
Call for price
The Megger VLF CR-60 is a portable cosine-rectangular very-low-frequency cable test system rated to 60 kVrms, combining VLF withstand, DC and sheath fault testing in one instrument for medium-voltage cables up to the 35 kV class.
Call for price
The Megger VLF CR-40 is a portable cosine-rectangular very-low-frequency cable test system rated to 40 kVrms, combining VLF withstand, DC and sheath fault testing in one instrument for medium-voltage cables up to the 23 kV class.
Call for price
The Megger DLRO100X is a 100 A micro-ohmmeter with internal memory and USB download, measuring 0.1 µΩ to 1.999 Ω with ±0.2% accuracy and CAT IV 600 V safety.
Call for price
The Megger MIT417/2 is a CAT IV 600 V insulation and continuity tester with 10–1000 V test voltages, insulation to 200 GΩ, PI and DAR diagnostics and true-RMS voltage measurement for comprehensive industrial testing.
Call for price
The Megger OCR50D is a high-capacity, self-contained mobile test set for verifying automatic oil circuit reclosers. Rated 50 kVA with output to 2800 A, a precision digital timer and colour touchscreen, it performs minimum-trip, time-current and sequence testing on single- and three-phase direct-acting reclosers.
Call for price
The Megger HV Test Set 120 kV is a portable DC high voltage test set for proof testing of cables and equipment, with 0–120 kV negative-polarity output at up to 3.5 mA.
Call for price
The Megger HV Test Set 110 kV is a portable DC high voltage test set for proof testing of cables and equipment, with 0–110 kV negative-polarity output at up to 4 mA.
Call for price
The Megger HV Test Set 80 kV is a portable DC high voltage test set for proof testing of cables and equipment, with 0–80 kV negative-polarity output at up to 5 mA.
Call for price
The Megger DDA-30 is a digital data acquisition and control retrofit that modernises the Multi-Amp CB-8130 circuit breaker test set, adding DSP-based digital sampling of the output current and full digital SCR control for accurate, NEMA AB-4-compliant breaker testing.
Call for price
The Megger SVERKER 780 is a versatile single-phase relay and substation test system delivering up to 250 A and 220 V AC with continuous phase shift and variable frequency (15–550 Hz). Building on the SVERKER 750, it adds frequency-relay testing and enhanced measurement for advanced protection work.
Call for price
The Megger FRAX 150 is a Sweep Frequency Response Analyzer (SFRA) for power transformers, detecting winding and core movement over a 0.1 Hz to 25 MHz range.
Bench Multimeters