MOHAMMAD MAHDI Electronics Trading LLC
All Megger Products
Megger authorization
AED 125,125 (excl.VAT)
The Megger MPAC128-ATEX is the ATEX-certified version of the MPAC128 acoustic imaging camera, safe for use in Zone 2 hazardous areas — visualising gas/air leaks and partial discharge to 120 m with a 128-microphone array.
AED 76,408 (excl.VAT)
The Megger TORKEL 950 is a portable battery load unit for discharge and capacity testing of high-voltage stationary battery banks in service, delivering up to 220 A at system voltages to 500 V with constant-current, constant-power, constant-resistance and profile modes, battery voltage monitoring and full reporting.
AED 68,225 (excl.VAT)
The Megger MPAC128 is a 128-microphone acoustic imaging camera that visualises compressed-air and gas leaks and electrical partial discharge from up to 120 m, with a 7-inch touchscreen and phase-resolved PD analysis.
AED 62,607 (excl.VAT)
The Megger TORKEL 900 series are portable battery load units for discharge and capacity testing of stationary battery banks in service, offering constant-current, constant-power, constant-resistance and profile modes, with current up to 220 A, system voltages to 500 V and expansion via TXL extra loads.
AED 58,172 (excl.VAT)
The Megger TORKEL 930 is a portable battery load unit for discharge and capacity testing of stationary battery banks in service, delivering up to 220 A at system voltages to 300 V with constant-current, constant-power, constant-resistance and profile modes, battery voltage monitoring and full reporting.
AED 46,866 (excl.VAT)
The Megger MPQ2000 is a portable IEC 61000-4-30 Ed.3 Class A power quality analyzer with four voltage and five current channels, capturing harmonics, flicker, 1 µs transients and voltage events in a rugged IP54 unit.
AED 44,371 (excl.VAT)
The Megger BVM600 provides comprehensive, continuous voltage monitoring of individual battery cells or blocks in critical power applications, integrating with Megger TORKEL load units for automated battery-string capacity testing.
AED 42,950 (excl.VAT)
The Megger MOM690 is a high-current micro-ohmmeter delivering up to 800 A AC or DC test current, measuring 0–200 mΩ to microhm resolution with ±1% accuracy — ideal for demanding contact and joint resistance testing.
AED 41,937 (excl.VAT)
The Megger DLRO600 is a high-current 600 A micro-ohmmeter measuring 0.1 µΩ to 1 Ω with a four-terminal technique, 300-result memory and RS232, for large circuit-breaker and busbar testing.
AED 38,670 (excl.VAT)
The Megger MOM600A is a 600 A micro-ohmmeter for measuring contact resistance in high-voltage circuit breakers, disconnectors, knife-contact fuses and busbar joints, resolving to microhms with ±1% accuracy.
AED 37,592 (excl.VAT)
The Megger DLRO100H is a 100 A micro-ohmmeter with internal memory, USB, Bluetooth, remote control and asset tagging, measuring 0.1 µΩ to 1.999 Ω with CAT IV 600 V safety.
AED 36,075 (excl.VAT)
The Megger TXL865 is an extra load unit that boosts the current capacity of TORKEL battery test systems, adding up to 165 A of load at 48 V so larger battery banks can be discharge-tested; several units can be linked for combined currents of several kA.
AED 35,035 (excl.VAT)
The Megger DLRO100XB is a battery-powered 100 A DualGround micro-ohmmeter that lets you test circuit breakers with both sides grounded, measuring 0.1 µΩ to 1.999 Ω with memory and USB.
AED 33,660 (excl.VAT)
The Megger TXL830 is an extra load unit that boosts the current capacity of TORKEL battery test systems, adding up to 330 A of load at 12 V so larger battery banks can be discharge-tested; several units can be linked for combined currents of several kA.
AED 33,605 (excl.VAT)
The Megger DLRO200 is a high-current 200 A micro-ohmmeter measuring 0.1 µΩ to 1 Ω using a four-terminal technique, with 300-result memory and RS-232 for substation resistance testing.
AED 33,303 (excl.VAT)
The Megger TXL870 is an extra load unit that boosts the current capacity of TORKEL battery test systems, adding up to 150 A of load at 60 V so larger battery banks can be discharge-tested; several units can be linked for combined currents of several kA.
AED 33,303 (excl.VAT)
The Megger TXL850 is an extra load unit that boosts the current capacity of TORKEL battery test systems, adding up to 250 A of load at 24 V so larger battery banks can be discharge-tested; several units can be linked for combined currents of several kA.
AED 33,165 (excl.VAT)
The Megger MOM200A is a 200 A micro-ohmmeter for measuring contact resistance in high-voltage circuit breakers, disconnectors and busbar joints, resolving down to microhms with ±1% accuracy.
AED 33,165 (excl.VAT)
The Megger MOM2 is a battery-powered hand-held micro-ohmmeter delivering up to 220 A test current, measuring 1 µΩ to 1000 mΩ with DualGround safety — ideal for testing circuit breaker contacts, busbar joints and connections.
AED 33,000 (excl.VAT)
The Megger DLRO100E is a 100 A micro-ohmmeter measuring 0.1 µΩ to 1.999 Ω with ±0.2% accuracy and CAT IV 600 V safety, for high-current contact resistance testing.
AED 30,662 (excl.VAT)
The Megger S1-1068 is a 10 kV diagnostic insulation resistance tester measuring up to 35 TΩ. With IR, PI, DAR, DD, stepped-voltage and ramp tests, strong noise immunity and a guard terminal, it delivers dependable HV insulation diagnostics on cables, machines, transformers and switchgear.
AED 29,541 (excl.VAT)
The Megger MPQ1000 is an IEC 61000-4-30 Class A handheld power quality analyzer with four voltage and four current channels, measuring harmonics, flicker, transients, sags/swells, power and energy in a rugged IP54 unit.
AED 27,445 (excl.VAT)
The Megger DLRO10X is a 10 A digital low resistance ohmmeter measuring 0.1 µΩ to 2000 Ω, with colour display, 700-test memory and RS232, bundled here with the DH4-C duplex handspike lead set.
AED 27,445 (excl.VAT)
The Megger DLRO10X is a 10 A digital low resistance ohmmeter with colour display, 700-test memory and RS232 download, measuring 0.1 µΩ to 2000 Ω with ±0.2% accuracy.
AED 26,334 (excl.VAT)
The Megger BVM300 monitors the voltage of individual cells or blocks in a battery string of up to 300 V DC while it is under load, integrating with Megger TORKEL load units for automated battery-bank capacity testing.
Original price was: AED 28,999.AED 25,800Current price is: AED 25,800. (excl.VAT)
The Megger MIT1525/2 is the flagship 15 kV insulation resistance tester measuring up to 30 TΩ, with a colour display, RE>Act and PIp diagnostics, selectable 1–6 mA output, Bluetooth and CertSuite Asset integration.
AED 25,502 (excl.VAT)
The Megger BITE2 is an advanced battery impedance test set that evaluates lead-acid and nickel-cadmium cells up to 7000 Ah with Pass/Warning/Fail assessment, storing 2000+ results for reliable stationary-battery maintenance.
AED 25,502 (excl.VAT)
The Megger BITE2P is a battery impedance test set with a built-in thermal printer, evaluating lead-acid and nickel-cadmium cells up to 7000 Ah with Pass/Warning/Fail assessment and on-the-spot printed reports.
AED 24,062 (excl.VAT)
The Megger MIT1025 is a 10 kV diagnostic insulation resistance tester measuring up to 20 TΩ, with IR, DAR, PI, DD, SV and ramp tests, capacitance and leakage current, memory and download, in a rugged CAT IV 600 V, IP65 case.
AED 23,952 (excl.VAT)
The Megger DLRO10HDX is a dual-power 10 A low resistance ohmmeter with 200-record memory, USB/PowerDB download and enhanced current capacity, in a rugged CAT III 300 V case.
AED 22,880 (excl.VAT)
The Megger TDR2050 is the top of the TDR2000 range — a dual-channel time domain reflectometer with 600 V CAT IV protection for connecting to live power cables. It adds Step TDR, Distance-Dependent Gain and FindEnd, locating faults on paired metallic cables up to 20 km with a colour display.
Original price was: AED 23,500.AED 21,500Current price is: AED 21,500. (excl.VAT)
The Megger MIT1025/2 is the advanced 10 kV insulation resistance tester measuring up to 20 TΩ, adding a colour display, RE>Act and PIp diagnostics, selectable 1–6 mA output, Bluetooth and CertSuite Asset integration.
AED 20,927 (excl.VAT)
The Megger TDR2010 is a dual-channel, high-resolution time domain reflectometer for locating faults on paired metallic cables up to 20 km. Building on the TDR2000/3, it adds trace tagging and extra colour schemes, with a colour display, dual-trace comparison, USB storage and 150 V CAT IV live connection.
AED 20,762 (excl.VAT)
The Megger DLRO10HD is a rugged dual-power (mains and battery) 10 A low resistance ohmmeter with five test modes and a heavy-duty CAT III 300 V case for field and substation use.
AED 20,570 (excl.VAT)
The Megger DLRO10HD is a rugged dual-power 10 A digital low resistance ohmmeter (DLRO) that measures from 0.1 micro-ohm resolution with 0.2% accuracy, ideal for testing thick conductors, bonds and weld quality on both battery and mains power.
AED 19,195 (excl.VAT)
Get the best price on Megger CFL535G in Dubai, UAE – Upgrade your testing toolkit with top-notch equipment today!
Bench Multimeters